As an Amazon Associate I earn from qualifying purchases.
To replace a belt on a Bissell vacuum cleaner, unplug the unit and remove the brush roll cover. Slide the old belt off and install the new one.
Replacing a belt on your Bissell vacuum cleaner is a simple yet essential maintenance task. Vacuum belts can wear out over time, leading to reduced suction and cleaning efficiency. By following a few straightforward steps, you can quickly restore your vacuum’s performance.
This guide will help you identify the signs of a worn belt, provide detailed instructions for replacement, and offer tips to extend the lifespan of your new belt. Regular maintenance ensures your vacuum operates at its best, keeping your home clean and allergen-free.
Credit: www.bissell.com
Gather Necessary Tools
Replacing the belt on your Bissell vacuum cleaner is a straightforward task. To start, you need to gather all the necessary tools. This ensures a smooth and efficient process. Here’s what you need to get started.
Required Tools
- Screwdriver – A Phillips head screwdriver is essential for removing screws.
- Replacement Belt – Ensure you have the correct belt for your Bissell model.
- Scissors – These help in cutting any tangled hair or debris.
- Flashlight – Use this to see inside dark areas of the vacuum.
Optional Tools
- Gloves – Protect your hands from dirt and grime.
- Small Brush – Useful for cleaning the vacuum’s interior.
- Compressed Air – Blows out dust and debris from tight spaces.
Credit: www.youtube.com
Safety Precautions
Replacing a belt on a Bissell vacuum cleaner is straightforward. But, safety is crucial. Follow these safety precautions to avoid injuries.
Unplug The Vacuum
Always unplug the vacuum before starting. This prevents accidental start-ups. Unplugging protects you from electric shocks.
Follow these simple steps to unplug safely:
- Locate the power cord.
- Firmly grip the plug, not the cord.
- Gently pull the plug from the outlet.
Remember to keep the power cord away from your work area.
Wear Protective Gear
Wearing protective gear is important. It keeps you safe from debris and accidents.
Consider these protective items:
- Gloves: Protect your hands from sharp edges.
- Safety goggles: Shield your eyes from dust.
Ensure your gear is comfortable and fits well.
Following these safety precautions ensures a smooth and safe belt replacement.
Access The Belt
To replace the belt on your Bissell vacuum cleaner, you first need to access it. This part of the process involves removing some key components of the vacuum cleaner. The steps are simple and easy to follow.
Remove The Bottom Cover
Start by unplugging your vacuum cleaner for safety. Place the vacuum on a flat surface with the bottom side up. You will see screws holding the bottom cover in place. Use a screwdriver to remove these screws.
Once the screws are out, gently lift the bottom cover. Set the cover and screws aside in a safe place. This ensures you won’t lose them later.
Locate The Belt
With the bottom cover removed, you will see the brush roll and the belt. The belt connects the motor shaft to the brush roll. It is usually black and rubbery.
If the belt is broken or damaged, you will need to remove it. Use your fingers or a small tool to carefully slide the belt off the motor shaft and brush roll.
Make sure to note how the belt is positioned. This will help you install the new belt correctly.
Credit: www.ifixit.com
Remove The Old Belt
Removing the old belt is a crucial step in replacing a belt on a Bissell vacuum cleaner. This process ensures that your vacuum operates efficiently. Follow these simple steps to remove the old belt safely and effectively.
Release The Belt From Rollers
First, turn off and unplug the vacuum cleaner for safety. Lay the vacuum on its back so you can access the brush rollers. Use a screwdriver to remove the screws holding the brush cover. Lift the cover to expose the rollers and the old belt.
Next, gently pull the brush roller out of its housing. You will see the belt wrapped around the roller and the motor shaft. Slide the belt off the roller and then off the motor shaft. Keep the roller aside for reassembly.
Dispose Of The Old Belt
Inspect the old belt for signs of wear, such as cracks or fraying. If the belt is damaged, it could affect vacuum performance. Dispose of the old belt responsibly. Place it in a trash bag to avoid mess.
Now, your vacuum is ready for the new belt installation. Follow the next steps in our guide to complete the process.
Install The New Belt
Replacing a belt on your Bissell vacuum cleaner can seem tricky. But, with a little guidance, you can easily install the new belt. Follow these steps to ensure your vacuum is up and running in no time.
Position The New Belt
First, take the new belt out of its packaging. Ensure it matches the old one. Place the belt around the motor shaft. This step is crucial for proper alignment.
Next, stretch the belt slightly. Position it around the drive shaft. Make sure it is not twisted. A twisted belt can cause issues.
Secure The Belt On Rollers
Now, you need to secure the belt on the rollers. Begin by placing the belt on the brush roller. Ensure it sits snugly in the groove.
Rotate the brush roller to check if the belt moves smoothly. If it does, then the belt is correctly secured. If not, adjust it until it does.
Finally, reassemble the vacuum cleaner. Ensure all parts are properly aligned. Your Bissell vacuum cleaner is now ready to use!
Reassemble The Vacuum
Now that you’ve replaced the belt on your Bissell vacuum cleaner, it’s time to put everything back together. Reassembling the vacuum ensures it works properly and safely. Follow these steps carefully to complete the reassembly process.
Reattach The Bottom Cover
First, take the bottom cover and align it with the base of the vacuum. Make sure the tabs on the cover fit into the slots on the base. Gently press the cover down until it clicks into place. This will secure the cover to the vacuum.
Next, locate the screws you removed earlier. Use a screwdriver to tighten each screw back into its original position. Be careful not to over-tighten, as this can damage the screw threads or the vacuum housing.
Ensure All Parts Are Secured
After reattaching the bottom cover, double-check that all parts are secured. Inspect the vacuum for any loose components. Make sure the brush roll is correctly positioned and can spin freely.
Verify that the belt is properly aligned and tensioned. A misaligned belt can cause the vacuum to malfunction. Lastly, ensure the power cord and any attachments are securely connected.
| Step | Action |
|---|---|
| 1 | Align bottom cover with base |
| 2 | Press cover until it clicks |
| 3 | Tighten screws |
| 4 | Check for loose parts |
| 5 | Verify brush roll and belt |
Following these steps ensures your vacuum is safe and ready to use. Regular maintenance helps keep your vacuum in top condition.
Test The Vacuum
After replacing the belt on your Bissell vacuum cleaner, it’s crucial to test it. This ensures that everything works correctly. Follow the steps below to test your vacuum cleaner.
Plug In The Vacuum
First, plug in the vacuum cleaner. Make sure the power cord is securely connected to the outlet. Check that the plug is not loose.
Check For Proper Functioning
Next, turn on the vacuum cleaner. Listen for any strange noises. If you hear anything unusual, turn off the vacuum immediately.
Then, test the suction by vacuuming a small area. Ensure the brush roll is spinning properly. If the brush roll doesn’t spin, the belt might not be installed correctly.
Check if the vacuum moves smoothly. If it feels hard to push, recheck the belt installation.
If all is well, your vacuum cleaner is ready for use!
Maintenance Tips
Keeping your Bissell vacuum cleaner in good shape ensures it lasts longer. Regular maintenance helps it work efficiently. Here are some essential maintenance tips.
Regular Belt Checks
Check the vacuum belt every month. Look for wear and tear. A worn belt can affect performance. Replace the belt if it looks damaged. Follow the instructions in the manual.
Other Maintenance Tasks
Other maintenance tasks are also important. Here are some to keep in mind:
- Clean the Filters: Rinse the filters every month. Let them dry completely before reinstalling.
- Empty the Dirt Cup: Empty the dirt cup after each use. This prevents blockages.
- Inspect the Brush Roll: Remove hair and debris from the brush roll weekly.
Use this table to remember the tasks:
| Maintenance Task | Frequency |
|---|---|
| Check Belt | Monthly |
| Clean Filters | Monthly |
| Empty Dirt Cup | After Each Use |
| Inspect Brush Roll | Weekly |
Frequently Asked Questions
How Do I Change The Belt On My Bissell Vacuum?
To change the belt on your Bissell vacuum, unplug it first. Remove the bottom cover, take out the old belt, and replace it with a new one. Reattach the cover and plug in the vacuum.
How To Put A Belt On A Bissell Powerforce Compact Turbo Vacuum?
Turn off and unplug the vacuum. Remove the bottom plate, then replace the belt around the brush and motor shaft. Reattach the plate.
How To Replace A Belt In A Vacuum Cleaner?
To replace a belt in a vacuum cleaner, first unplug the device. Access the brush roll by removing the cover. Take out the old belt and place the new one around the motor shaft and brush roll. Reassemble the cover and plug in the vacuum to test.
Why Is My Bissell Vacuum Brush Not Spinning?
Your Bissell vacuum brush might not spin due to tangled hair, a broken belt, or a faulty motor. Check and clean the brush, replace the belt, and inspect the motor for any issues.
How Do I Know If My Bissell Belt Is Broken?
A burning smell or vacuum not picking up debris often indicates a broken belt.
Conclusion
Replacing a belt on a Bissell vacuum cleaner is simple and cost-effective. Follow the steps carefully for optimal performance. Regular maintenance ensures your vacuum lasts longer. A well-functioning belt improves cleaning efficiency. Keep your vacuum in top shape with routine checks and timely replacements.
Happy cleaning!
As an Amazon Associate I earn from qualifying purchases.
